Magigoo Original (120ml) – Large format, all‑in‑one bed adhesive

Magigoo Original is an all‑in‑one first‑layer adhesive for FDM/FFF printing. The 120ml size is ideal for larger build plates and higher‑throughput environments, helping prints stick while hot and release as the bed cools.

Key benefits

• Sure first‑layer adhesion to help reduce warping on common materials.
• Easy release on cooling—often no scraping tools needed.
• Odourless and non‑toxic, with water‑based cleaning.
• Larger size for larger beds / print farms; easier coverage over big surfaces.

How to use

1. Apply on a clean build surface (ideally on a cool bed).
2. Shake the bottle, then press the applicator tip against the bed to start the flow (avoid squeezing hard).
3. Spread an even, thin coat over the active print area—make sure no spots are missed.
4. Start your print. Most Magigoo products grip when the bed is hot and release as the bed cools.
5. Let the bed cool to encourage release, then clean with water as needed.

Print tips

• Cover only the active print area for best economy and fastest refresh.
• On large parts, ensure consistent bed temperature and use brims if recommended by your filament profile.

Cleanup

Wipe the cooled bed with a damp cloth using just water.

Safety & handling

• Do not squeeze aggressively; the applicator has a valve.
• Store upright with cap closed, away from direct sunlight.

What’s included

• 1 × Magigoo Original bottle (large format)