Magigoo Pro PPGF (50ml) – For glass‑fibre reinforced polypropylene

Magigoo Pro PPGF is designed for glass‑fibre filled polypropylene (GFPP) composites, providing a strong adhesion platform for these demanding materials. It’s intended to improve first‑layer reliability and help you print reinforced PP parts with fewer adhesion failures.

Key benefits

• Optimised for GFPP materials that are notoriously challenging to keep flat.
• Helps reduce warping and lifting with reinforced polypropylene composites.
• Developed for professional, repeatable printing workflows.

How to use

1. Apply on a clean build surface (ideally on a cool bed).
2. Shake the bottle, then press the applicator tip against the bed to start the flow (avoid squeezing hard).
3. Spread an even, thin coat over the active print area—make sure no spots are missed.
4. Start your print. Most Magigoo products grip when the bed is hot and release as the bed cools.

Print tips

• Because GFPP formulations vary by brand, tune bed temperature and first-layer settings for your filament.
• Use a brim for large footprints to improve edge hold.

Cleanup

Use water and a cloth. For removal/cleanup guidance with PPGF, follow Magigoo’s recommendations for your workflow and allow the bed to cool appropriately.

Safety & handling

• Refer to the Safety Data Sheet before use and follow safe handling practices.

What’s included

• 1 × Magigoo Pro PPGF pen bottle