Micro Swiss Direct Drive Extruder configured for Linear Rail System
- No modification required, simple plug and play
- No printed brackets or sandwiches
Features:
- Dual-drive train
- Hardened tool steel, CNC precision cut gears
- Adjustable filament grip
- Easy filament loading
- Short, highly constrained filament path
- Prints flexible filaments with high speed and accuracy
- Outstanding extrusion control
- Lightweight aluminum body
Fits:
- Printers with MGN12 Linear Rail with MGN12H Carriage Block
- Only for printers with bottom belt mounting position
Contents:
- Stepper motor, Linear Rail and Carriage Block are NOT included
- 1x Micro Swiss All Metal Hotend
- 1x Main Extruder body
- 1x Linear Rail mounting bracket
- 1x Extruder Lever
- 1x Spring Pin
- 1x Spring
- 2x Gears
- 1x Tension Knob
- 1x Shoulder Pin
- 1x Extension Cable
- 3x M3 x .5 x 6mm Motor Mounting Screws
- 4x M3 x .5 x 8mm Linear Rail bracket mounting screws
- 2x M3 x .5 x 10mm Screws
- 2x M3 x .5 Nuts
- 5x Zip Ties
- 1x Printed Bracket
- 1x Beveled Capricorn Liner
Reminder:
When you installed the Micro Swiss direct Drive, did you change "Retraction distance" in your Slicer?
For Ender 3 series should be 1.5-2mm @ 50mm/s
For Cr-10 Series should be 2.0-2.5mm @ 50mm/s
Don't exceed 3.0mm distance. If retractions is still 5.0 - 6.5mm it will pull hot filament up into Heat break and harden there when it hits the cold side and jam up!
Micro Swiss Direct Drive Extruder for Direct Drive for Linear Rail System (With Hotend)
In stock
USD
USA Shipping: All orders ship from Canada. Duties and taxes may apply on orders over $800.
Current Inventory: