Barcode: STDTPE85ABLKK5

Esta categoría de filamento de impresión 3D se siente como el caucho. El TPE es un copolímero, lo que significa que tiene propiedades tanto elásticas como plásticas. Los filamentos de TPE se utilizan en prototipos que necesitan piezas que requieren flexión o flexibilidad.

La adhesión capa a capa es impresionante en el elastómero TPE, por lo que las posibilidades de que la impresión se separe después del enfriamiento son mínimas.

Se usa mucho en aplicaciones comerciales, como piezas de automóviles, suministros médicos, suelas de zapatos, sellado contra la intemperie para puertas y ventanas, aislamiento eléctrico, fundas para teléfonos inteligentes y pulseras.

Tiene buena resistencia a la intemperie, al ozono y a los rayos UV.

Este filamento de impresión 3D extremadamente flexible te permitirá crear impresiones que tienen las propiedades de una goma blanda, haciéndola incluso más elástica que el PLA. Dado que es bastante flexible, la velocidad debe ser lenta durante el proceso de impresión porque estos filamentos pueden unirse a la extrusora. La temperatura de impresión debe estar entre 225-235C.

El TPE no es soluble, pero es ideal para fabricar juguetes, artículos novedosos, cinturones, gorras, parachoques, etc.

Material	TPE85A
Filament Diameter	1.75mm
Spool Weight	0.5kg
Colour	Black
Shore Hardness	85A
Material Type	Flexible Thermoplastic Elastomer
Recommended Nozzle Temperature	210–240°C
Recommended Bed Temperature	40–60°C
Print Speed Recommendation	Slow to Moderate
Layer Adhesion	Excellent
Flexibility	High
Impact Resistance	High
Printer Compatibility	Most FDM/FFF 3D Printers Supporting Flexible Filaments
Recommended Extruder Type	Direct Drive Preferred

What is TPE85A filament used for?

TPE85A filament is commonly used for flexible parts such as gaskets, phone cases, vibration dampeners, wearable accessories, protective bumpers, and shock-absorbing components.

Is TPE85A easier to print than softer TPU or TPE materials?

Yes. TPE85A offers a balance of flexibility and printability, making it easier to feed and control than ultra-soft flexible filaments.

Can I print TPE85A on a Bowden printer?

Yes, although direct drive extruders generally provide more reliable performance when printing flexible filament materials.

What print speed is recommended for TPE85A?

Flexible filaments typically print best at slower speeds to improve extrusion consistency and reduce feeding issues.

Does TPE85A require a heated bed?

A heated bed is recommended to improve adhesion and overall print consistency, although some printers may print successfully without one.

How flexible is TPE85A filament?

TPE85A offers high flexibility with good durability and elasticity while still maintaining easier printability than softer flexible materials.

What printers are compatible with this filament?

This 1.75mm TPE85A filament works with most FDM and FFF 3D printers that support flexible materials and proper extrusion control.

How should flexible filament be stored?

Store TPE85A filament in a sealed dry container with desiccant to reduce moisture absorption and maintain reliable print quality.

Jim L.

Good product ! Thank you ! I will buy again !

Donald G.

My first time printing TPE 85A. I was scared at first because if so many people had a hard time to print, but it turned out ok for my project.

Geko H.

I purchased this after I ran into problems with another filament not adhering and clogging up my nozzle. This filament was a relief and I had little to no issues.

Ilija J.

This stuff is amazing. Prints great and is super durable and strong. Only sticks to a bed with packing tape applied to it though.

Marc C.

Hard to print on my stock Ender3, but it's workes with small pieces on blue tape on bed. Very very strong material!!!

JEANLUC S.

Thanks

Daniel J.

I had a great experience with this tpe product. it is very durable and strong. It is difficult for those beginners. I strongly advise you to put a blue paint tape on the bed so that it adheres better to the tape with good heat.

Russ B.

It turned out great. I printed a bench out of it. There was a little bit of stringing as to be expected with tpe. I printed a grip for the upper part of my hockey stick. I used the fuzzy skin setting on cura to increase grip. It works super well. Tips: Print at max temp(helps not clog up) Use a brim Get magigoo TPE(It saves the hassle of getting it to stick.)

Cory

I concur with Dale's experiences. This is the softest, closest to rubber filament I have yet used, but it does not stick very well and required glue stick 60ish degrees bed temp (I think as to keep the glue from detaching as it does with higher temps) and a brim. Outside of that though, that I was able to print the tire shown in the image on a bowden style, unmodified CR-6 is pretty cool. Most other TPUs make poor tires because they aren't soft or grippy enough, but this legitimately feels like a lego tire or even softer. It has excellent grip on carpet. Its filaments like these at reasonable prices which are this sites selling point. Like this or soft pla.

Dale P.

This product is strong and durable. The only thing I didn't like about it is that it was pure torcher to get it to stick to the glass bed. I tried everything under the kitchen sink and then some. The only solution was what I read in the blogs and was my last resort. A white paper held down with blue masking tape. Go figure. It absorbs the oils in the TPE. What a relief.

Marca: 3D Printing Canada / 10 Reviews

Negro - Filamento estándar TPE85A - 1,75 mm, 0,5 kg

Limited Stock – Call Now Temporarily Out of Stock Sale

USD USD

As low as USD

Volume Discount
Cantidad
Discount

Mix & Match from the Bulk 3D Printing Filament page to Save More!

All orders are shipped from and processed in Canada. Duties, taxes, tariffs, and credit card foreign transaction fees may apply.

¡Algo salió mal!
Actualice la página y vuelva a intentarlo.

Negro - Filamento estándar TPE85A - 1,75 mm, 0,5 kg

¡Gracias por dar el primer paso hacia el éxito!

Estamos encantados por tu interés y ya estamos explorando las emocionantes oportunidades que nos esperan.

Nuestro equipo de expertos está comprometido a ofrecer resultados excepcionales, y nos pondremos en contacto pronto para mostrarte cómo podemos impulsar tu éxito.

Nombre *

Nombre de la empresa *

Correo electrónico *

Teléfono *

Preguntas / Comentarios *

By clicking Submit, you agree to our Terms & Conditions and Privacy Policy.