/
Key Features
Magigoo Original (50ml) – Sure adhesion with easy release
Magigoo Original is an all‑in‑one first‑layer adhesive for FDM/FFF 3D printing. It’s designed to help parts stick reliably during printing and then release when the build plate cools, reducing warping and failed first layers.
Key benefits
- Reliable first‑layer adhesion that helps reduce warping and edge lift.
- “Easy release” on cooling—prints can pop off without tools on many surfaces.
- Odourless and non‑toxic, with water‑based cleaning.
- Fast, pen-style application—apply a thin coat only where you print.
- Long‑lasting usage (often 100+ average prints per bottle, depending on bed size and application).
How to use
- Apply on a clean build surface (ideally on a cool bed).
- Shake the bottle, then press the applicator tip against the bed to start the flow (avoid squeezing hard).
- Spread an even, thin coat over the active print area—make sure no spots are missed.
- Start your print. Most Magigoo products grip when the bed is hot and release as the bed cools.
- After printing, wipe the cooled plate with a damp cloth and water to refresh/clean the surface.
Print tips
- For best results, make sure the bed is properly leveled and free from oils/detergents.
- Apply a smooth, even coat—smoothing passes can improve bottom-surface finish.
Cleanup
Wipe the cooled bed with a damp cloth using just water.
Safety & handling
- Do not squeeze aggressively—flow is controlled by the applicator valve.
- Keep the applicator tip clean and away from dust/filament debris.
What’s included
- 1 × Magigoo Original pen bottle
Specifications
Specs
- Net volume: 50ml