Magigoo Pro HT (50ml) – High‑temperature filament adhesion

Magigoo Pro HT is a specialised first‑layer adhesive developed for high‑temperature FDM materials that are prone to warping. It is intended for elevated build‑plate temperatures used for materials like PEEK and PEKK.

Key benefits

• Developed for high‑temperature filaments with strong warping tendencies.
• Specialised solution for printing at elevated bed temperatures (tested for high-temperature workflows).
• Water‑based cleaning after use.

How to use

1. Apply on a clean build surface (ideally on a cool bed).
2. Shake the bottle, then press the applicator tip against the bed to start the flow (avoid squeezing hard).
3. Spread an even, thin coat over the active print area—make sure no spots are missed.
4. Start your print. Most Magigoo products grip when the bed is hot and release as the bed cools.

Print tips

• High‑temp materials benefit from controlled environments (enclosure/heated chamber, stable temps).
• A second application over a dried first layer can help for large, challenging prints.

Cleanup

Wipe with water and a cloth once the bed is cool.

Safety & handling

• Apply on a cool, cleaned bed; keep the applicator tip clean.

What’s included

• 1 × Magigoo Pro HT pen bottle

Technical specifications

What printers are saying