/
Key Features
Magigoo Pro PP (50ml) – Adhesion solution for polypropylene
Magigoo Pro PP is a first‑layer adhesive engineered specifically for polypropylene (PP) and other polyolefin‑type materials that can be difficult to bond to a build plate. It helps provide a strong adhesion platform during printing and supports easier removal once conditions are right.
Key benefits
- Specifically designed for polypropylene printing.
- Helps reduce warping and lifting common with PP parts.
- Water‑based formulation intended to be safer and cleaner than many alternatives.
How to use
- Apply on a clean build surface (ideally on a cool bed).
- Shake the bottle, then press the applicator tip against the bed to start the flow (avoid squeezing hard).
- Spread an even, thin coat over the active print area—make sure no spots are missed.
- Start your print. Most Magigoo products grip when the bed is hot and release as the bed cools.
Print tips
- Use filament manufacturer bed/nozzle recommendations and tune first-layer settings for your PP brand.
- For challenging parts, use a brim and ensure excellent first-layer squish without over-compression.
Cleanup
Magigoo Pro PP may benefit from a short soak before wiping off. Use water and a cloth.
Safety & handling
- Refer to the Safety Data Sheet before use.
- Avoid contact with eyes; washing hands after use is recommended and gloves are advised.
What’s included
- 1 × Magigoo Pro PP pen bottle
Specifications
Specs
- Net volume: 50ml