Ray A.
Works like the original which is what I expected it to do
Dan P.
This will be my third BL touch in a year. I love what they do and hope this one lasts longer. The first one didn't last long at all so #2 was close to a year. Maybe third time's a charm. We shall see.
Wade V.
Came as shown. Mine included a connector for the 4.2.2 / 4.2.7 boards. I was able to make my own extension, as I ordered the wrong one. Minimal packaging, which I appreciate.
Greg B.
Get extension cables at the same time, but figure out what you need without having it in hand, so you don't have to wait until your next order to justify the shipping cost for only 3 grams of wire.
Cory S.
It works well, and surprisingly better than I expected.
I had previously bought a clone 3d touch by triangle labs, a well known aliexpress seller but had some problems where it would occasionally not retract while bed mesh calibrating. Not sure if it was just mine, but the long and short is that after that I bought an original, and using probe_accuracy in klipper get a much more accurate reading on top of reliable operation, which I was surprised about.
I previously thought a clone was just as good, but maybe not.
There is another feature that the real thing has over the clone I bought, and that's that the probe sticks out of the body less when retracted which I assume is better for not knocking into your print.
Edward G.
BLTouch sensor... it does BLTouch things. worked.. was shipped quickly. GTG.
Robert A.
Works great - an easy add on for the Ender 6
Sylvain l.
Fonctionne très bien
Sylvain l.
Bon produit tres satisfait
Jeremie D.
I used BLTouch's clone and it was awful. With the real and original thing, everything is perfect : no more trial and error, I enabled it on the firmware and boom! Worked at the first try
Attn: T.
Pretty easy to setup and get working if you are familiar with Marlin. A steep learning curve if you are not.
Dani C.
Works great. No longer need to worry about manually leveling my bed!
Mark M.
Product works well, but installation instructions are non-existent. The QR code links to the website had many different variants, none of which were helpful for my machine (ERYONE Thinker SE) and I had to make extension cables. Also needed to print a custom mounting bracket. Once everything was installed and wired correctly, it works well.
David K.
Love the idea of auto levelling when it works. Unfortunately bktouch v3.1 is finicky when connected to the SKR E3 mini board. Occasionally I get failed probing. Works now but took a bit of experimenting with the firmware to get it right.
John C.
HARDWARE NOT INCLUDED!! You need to supply your own M3nuts (2x) and M3x10mm bolts (2x).
The sensor is great and I would have given it 5 stars but it doesnt come with the hardware needed to install it. Due to the pandemic its harder to find certain items because I cant got to the store and get them. And unless I'm missing it, this is not mentioned anywhere on 3DPC or the installation video. This frustrating experience is the only thing that interupted an otherwise straight forward installation.
Sylvain C.
J'ai une copy de I3 modifier d'un bout à l'autre. Carte MKS sgen_L firmware marlin 2 . Branché et configurer le firmware , fonctionne du premier coup et 1ier layer à 0.1mm pratiquement parfait sur un heatbed pcb aluminuim. J'ai acheter le kit de ralonge de fil qui ma donner juste la bonne longeure. avec mon anscien sensor(troxy xy08N) j'étais pas toujours capable à 0.2mm.
Après quelque jours d'utilisation je suis vraiment satisfait.
Rick M.
Improvement over the conductive sensor the printer came with
Stephen K.
IT was good, Shipping was a bit confusing but there is a lot going on in the world, so I wouldn't hold it against anyone
Brian K.
Works great. Installation is time consuming and rather involved, RESEARCH the procedure BEFORE you purchase to ensure you have everything you need.
Michael M.
Have not received it yet
Rejean T.
I installed the bltouch on my Geeetech A10. I love it.
fabio p.
genuine product happy about that
Zacharie B.
I doubt I could ever go back to manual bed leveling. I use it on my sidewinder X1 with the waggster mod and I love it.
Daniel S.
Great sensor. It was easy to install after printing the bracket suggested on thingiverse. I wish the bracket was available to save time on installation.
Kyle W.
Works amazing, fine tuning the Z offset is just lovely. Makes leveling and first layer a dream
Pierre J.
Very good Product. Super srvc. Shop very fast. Received on 24h
Donovan B.
I had heard so many great things about a BLTouch and I finally decided to bite the bullet. Best decision I ever made. I have a CR10S Pro and the stock sensor is garbage. I was nearly ready to sell the printer and try something else, but took the gamble on this. 3D Canada's installation video was spot on. The only thing that I would suggest making more clear was that you will need two additional M3 nuts to install the mount. This wasn't overly clear to me until I was deep into installation, I wasn't able to finish the install until I stopped by the hardware store. Additionally I would suggest anyone installing a BLTouch watch this video on how to properly set the z-offset. https://www.youtube.com/watch?v=y_1Kg45APko
francis g.
Work really well really happy with it. Must have if you don't love to always level your bed.
Francesco R.
Sensor works great with the creality kit. No issues with the setup
Many A.
Can't recommend this enough for CR10S Pro users. Ditch the stupid ABL sensor the machine comes with. It does NOT work. Stop hitting your head against the wall. I did, for 8 months, hack this, hack that, watch this video, read that reddit post. Just buy this and the long replacement cable (Genuine ANTCLABS BLTouch Extension Cables SM-XD-2000 (XD-1800)), spend 1 hour on your printer and save your sanity (FOLLOW the updated video) :-).
No more head crashes, scratched build plate. Did I mention that EVERYTHING sticks on the first try (replace your bed with the silicate glass plate from creality.....it helps a lot). Bed level once and be done with it. I literally print day after day having ABL'd the machine once......wipe the build plate, upload the model to octoprint and print. It just works.
Related to the build process, during the video they ask you to download the firmware and compile/upload it after making a tiny change in configuration.h (I think). That's all fine, BUT I ran into a small issue with octoprint not being able to handle the new setting for baud rate of 250000. I ended up going back into that file and changing the baud rate setting to 115200 (which is pretty standard I think). That made the USB/serial connection much more robust. No more random disconnects during print.
This should be standard on -- atleast -- CR10S Pro, 3D Printing Canada should insist/encourage/push costumers to purchase this at the same time........It will just make your experience a lot nicer.
Claude P.
Fonctionne parfaitement. Monter sur ma Alfawise U30 .
Mike M.
Perfect first layer every time!
This should be standard equipment. Best money you’ll spend on an add on.
James P.
Works GREAT. Used the updated installation video on Youtube for CR 10S pro. Highly recommended upgrade.
Patrick A.
Got great installation help from 3D Printing Canada. There was an EndStop failure that gave me a scare that it didn't work, but all went well once it was repaired.
wanda R.
Installation was a breeze , lots of YouTube vids to help if you get stuck . Now perfect first layer everytime
Mathieu G.
The only thing I can say about it, it's I love it :-)
