/
Key Features
Magigoo Supergrip (50ml) – Built for flexible & polymer build plates
Magigoo Supergrip is formulated for modern flexible and polymeric build surfaces (such as many PEI/flex plates and similar sheets). It provides strong adhesion during printing and releases as the bed cools, helping you print common materials more consistently on flex‑plate setups.
Key benefits
- Designed for flexible/polymeric build plates where traditional glues can underperform.
- Strong grip while hot with release on cooling to simplify removals.
- Water‑based cleanup.
- Pen-style application for quick, even coverage only where you print.
How to use
- Apply on a clean build surface (ideally on a cool bed).
- Shake the bottle, then press the applicator tip against the bed to start the flow (avoid squeezing hard).
- Spread an even, thin coat over the active print area—make sure no spots are missed.
- Start your print. Most Magigoo products grip when the bed is hot and release as the bed cools.
Print tips
- Apply an even thin layer on a cleaned surface for best consistency.
- For large parts, consider a brim if your filament profile recommends it.
Cleanup
After printing, wipe the cool plate with a damp cloth and water.
Safety & handling
- Do not squeeze aggressively—avoid the applicator popping off.
- Keep away from dirt and debris to prevent clogging or uneven flow.
What’s included
- 1 × Magigoo Supergrip pen bottle
Specifications
Specs
- Net volume: 50ml