Meet the Cutting-Edge Industrial 3D-Printer.
Bringing desktop 3D printing to the next industrial level.
Printing volume
- Dual: 260x260x260mm
- Single: 305x260x260mm
Printing capability and nozzle design with IDEX dual nozzle system
- Independent dual extruder (IDEX), for different printing modes as dual material printing, mirror printing, copy printing
- Modular design of the printhead, quick-change system for easy installation and replacement and convenient maintenance
- Dual-drive gear extruder, increase the contact surface for more torque and higher reliability
Quick change printhead of the PRO 310
Thermal design for high strength and high accuracy
- The maximum temperature of the chamber is 100°C, the maximum heating temperature of the build plate is 160°C. It provides fast heating with its high-power output
- Excellent thermal design reduce thermal deformation of the mechanics and lower the shrinkage of models during printing, avoid warping and increase the interlayer-adhesion
- The maximum temperature of the nozzle is 300°C
- High-power nozzle heaters decrease the heating time and ensures that the nozzle is rapidly heated, and the filament is fully melted in the nozzle
INTAMBox
- Overall sealed design with molecular sieve dehumidification, built-in temperature and humidity monitoring sensor.
- Independent design, easy to place and maintain
- Design of active fixing for spools, prevent the filaments from being loose and knotted
- Spool capacity: 2*1kg
for the PRO 310
> Engineering materials:
PA6/66, PA6-CF, PA12-CF, PC, PC-ABS, ABS, ASA, PLA
> Support materials:
HIPS, PVA, SP3040, SP3050
> Open material system
PA6/66, PA6-CF, PA12-CF, PC, PC-ABS, ABS, ASA, PLA
> Support materials:
HIPS, PVA, SP3040, SP3050
> Open material system
Flexible build plate for easy part removal
Automated mesh leveling
Automated mesh leveling for high reliability
- Different levelling modes with 4×4 or 10×10 points can be chosen
- Levelling is only required at calibration, no need to repeat it before every print job
7-inch smart screen with INTAMTOUCH 2023
The printing process can be monitored remotely
through the camera, and can be controlled remotely via INTAMSUITE 2023
Industry 4.0 ready with API/SDK for implementation into production facilities