What this carbon fibre build surface is for

The Carbon Fiber Fibre Build Surface 410x410x4mm - 3K Twill Glossy is a 4 mm thick carbon fibre plate for use as a flat, rigid build surface. The plate is made from pre-preg (pre-impregnated) 3K twill carbon fibre and is constructed to provide a stiff surface for printing applications.

The layered construction places the carbon fibre in opposing directions that cross each other. This layup helps create a flat and extremely stiff surface.

Key features of the 3K twill glossy carbon fibre plate

• Pre-preg carbon fibre construction: Made from pre-preg, or pre-impregnated, 3K twill carbon fibre.
• Rigid plate format: A 4 mm thick build surface designed for stiffness and flatness.
• Opposing layer orientation: Layers are laid in opposing directions and cross each other to improve structural stability.
• Glossy 3K twill finish: Uses a glossy 3K twill carbon fibre surface.
• Thermally conductive material: Carbon fibre conducts temperature and will hold heat after use.

How to use this carbon fibre build surface

This carbon fibre plate is recommended for use with a glue stick as the connecting and release layer. The glue stick helps manage adhesion and part release on the build surface.

Carbon fibre is thermally conductive and will retain heat, so the plate should be handled carefully when removed from a heated surface.

Typical use cases for a 410 x 410 mm carbon fibre build plate

• Large-format 3D printers: Suitable for machines that accept a 410 x 410 mm build surface.
• Users needing a stiff print base: The cross-laid carbon fibre construction is intended for applications where surface rigidity matters.
• Heated bed setups: The thermally conductive material works in heated printing environments, with appropriate care during handling.

Binder clips are not included, so the carbon fibre build surface should be paired with a separate securing method that matches the printer setup.

Technical specifications

Frequently asked

What printers are saying